NIKON EN-EL4 Replacement Battery Charger

FOR The ENEL4 Charger is applied to short time charge .And the charge time for one battery is only about 3 Hours .Besides ,its adjusting function makes it possible to precisely display the remaining volume and the charging volume when it is being charged.

Specification:
1.Input Voltage: DC 14.5v - 16v
2.Imput Current: 1000mA
3.Output Voltage: DC 12.6v
4.Output Current: 1000mA
5.Working Humidity: 85%(MAX)
6.Dimension: 95 x 75 x 41 mm
7.Condition: Replacement Battery Charger, Brand New
8.Weight: 100 g
9.Warranty: 1 year

CHARGE APPROACH USAGE:
1.Plug DC power into charger 4 INDICATORS ARE LIGHT,LED IS GREEN(NO BATTERY).
2.Put the battery into charger correctly with the button fastened.
3.After the battery is installed into charger,when the 4th LED indicator from the left is red:the battery is being charged.When the 1st green LED is light,the battery voltage is 11V,When the 2nd green LED is light,the battery voltage is 12V .When the 3rd green LED is light,the charge current is less than 650mA.When the 4th red LED turns green,the charger current is less than 50mA,and the battery is fully charged .4 indicators reflert 30%,50%,80%,100% of volume respectivly.

Warning:
1.This charger is only for indoor use,never expose it into rain or snow
2.Do not disassemble or assemble the charger.

NOTICE:
1.Avoid the charger crashing to the ground or heavy on it
2.Chid using the charger should be under the supervision of adult
3.D0 not use or store the charger in the direct sunshine,besides calorific equipments or in any other high temperature sites.